PET Preform Injection Molding Machine FST-2300
- Clamp tonnage: 230Ton
- Operation Model: Automatic Micro Computer Control
- Suitable Product: PET bottle preform making machine, HDPE cap making machine
Benefit of FESTA FST-2300 PET Injection Molding System
This machine is an economical PET bottle preform injection molding system equipment developed by FESTA. It is much higher than other brands of PET injection molding machine in the market in terms of product quality, production efficiency, energy consumption, cost and hardware configuration. Molds with multiple cavities can be configured to achieve different products. The product range includes PET water bottle preform, beverage bottle preform, oil bottle preform, cosmetic box and jar bottle preform.
After the servo driver obtains the pressure flow instruction from the injection molding machine controller, compared with the actual pressure and speed of the feedback, the appropriate control deviation is calculated as the speed instruction of the servo motor.
Therefore, the injection molding control response block has high precision, and the molded PET or plastic products have high precision.
MODEL | FST-2300 | ||
INJECTION UNIT |
|
|
|
Screw diameter | mm | 50 | 52 |
Shot size(theoretical) | Cm³ | 608 | 658 |
Shot weight | g | 546 | 592 |
Injection pressure | Mpa | 184 | 170 |
Injection rate | g/s | 160 | 176 |
Screw L/D ratio | L/D | 22.8 | 21.9 |
Screw speed | r.p.m | 0-180 | |
Nozzle Diameter | Srmm | 20 | |
CLAMPING |
|
| |
Clamp tonnage | KN | 2300 | |
Toggle stroke | mm | 480 | |
Mould Thickness | mm | 200-510 | |
Space between tie-bars | mm | 510X510 | |
Ejector stroke | mm | 155 | |
Ejector tonnage | KN | 70 | |
Ejector number | Piece | 9 | |
Hole Diameter | mm | 160 | |
OTHERS |
|
| |
Heat power | KW | 11.6 | |
Max. pump pressure | MPa | 16 | |
Pump motor power | KW | 18.5 | |
Valve Size | mm | 16 | |
Machine dimension | m | 5.7X1.8X2.0 | |
Machine weight | t | 6.5 | |
Oil tank capacity | L | 300 | |
Send Your Inquery
Related Machines
